|
|
 |
 |
 |
FAQ |
 |
At your place:Home>Question |
 |
 |
| Make you known about the details of producing ,we list the frequently question for you |
 |
 |
| and solve it step by step. |
 |
| |
 |
|
|
|
|
|
|
1.General speaking,the 25T of punching machine or 50T of punching machine means the weight of machine?
Anster: It means the standard of pressed power of punching
2.The journey parameter of punching machine shows 10-40MM that means the journey is flexible?
Answer: It means the scope of journey by this type of this punching machine is 10-40MM.Each punching machine has a standardizd one. eg. The journey of HCP-35 punching machine that we produced is 25MM,but we can produce one that the journey of scope from 10 to 40MM.
3﹜The time of punching press :1200 per minute,is it true?
Answer: The punching machine of LANDRAY is adjustable in the stipulated scope,200-1200/min noted on machine means the maximum is 1200/min. In practice, we need to adjust the scope according to the quality , materail of mould .
4﹜
what is the volume of adjust for slider?
Answer: The height of slider at maximum ,you can turn down the span. eg. when height of slider is 210,the volume of adjustment is 30.
5.which one is the length of the working platform and which one is the width?
Answer: The area of working platform is noted by the length * the width
6. Before the appliance of machine is sold , Has the machine been test?
Answer: we will test all our machine for 100,000 times before they are sold,and we will test it at different speed.
7﹜
what is the diference between the rack of C and rack of H?
Answer: The mainly deference between Rack and Rack H is the shape of frame,Rack of C is adopt double pillar and one crankshaft,but Rack of H is adopt four pillars and double crankshaft.the later is more steady and constant.
8﹜
what is the frame of machine made of?
Answer: some company produce the machine just adopt steel and weld it,so it only meet the low speed of production.while our frame of machine is made of integrated high- intensity steel purchasing from one of largest casting companies-----RIYUE CASDTING
9﹜How to lock the mould of slider?
Answer: our punching make use of locking hole in transverse direction which is arranged from up to down.
10. Do you have any advantages as the reason for our purchasing?
Answer: Firstly ,we add the copper sleeve in crankshaft that can make our products durable and keep the precision of mould. secondly, our machine adopt double-banalance of appliance that can make the whole machine stable.Finally, our Rack-C machine is mounted safe door that can make worker more safe when they are operating. |
|
 |
|
|
